🌿 环保产品工厂直供 — 支持小批量订单 | 立即获取免费报价 →

新闻 & 动态

为B2B买家提供行业知识、制造专业知识和市场动态。

公司新闻与动态

Green Dot (Grüner Punkt) Kang Hao certification

📅 2023-06-02 👁 1225 次浏览 🏷 公司新闻与动态
Green Dot (Grüner Punkt) Kang Hao certification

Kang Hao has past Green Dot (Grüner Punkt) certification


The Green Dot (GermanDer Grüne Punkt) is the license symbol of a European network of industry-funded systems for recycling the packaging materials of consumer goods. The logo is trademark protected worldwide.

History of "Grüner Punkt"

The German "Grüner Punkt" is considered the forerunner of the European scheme. It was originally introduced by Duales System Deutschland GmbH (DSD) in 1990 before the introduction of a Packaging Ordinance under the Waste Act. Since the successful introduction of the German industry-funded dual system, similar Green Dot systems have been introduced in most other European countries.

The Green Dot scheme is covered under the European "Packaging and packaging waste directive - 94/62/EC", which is binding on all companies if their products use packaging and requires manufacturers to recover their own packaging. According to the directive, if a company does not join the Green Dot scheme, they must collect recyclable packaging themselves, although this is almost always impossible for mass products and only viable for low-volume producers. Regulatory authorities in individual countries are empowered to fine companies for non-compliance, although enforcement varies by country. Environmentalists claim that some countries deliberately turn a blind eye to the European directive.

Since its European introduction, the scheme has been rolled out to 23 European countries. In some — namely France, Turkey, Spain, Portugal and Bulgaria — companies joining the Green Dot scheme must use the logo.

The Green Dot is used by more than 130,000 companies, encompassing 460 billion packages.

← 返回
in f 𝕏

更多文章

探索更多行业洞察和制造知识

专业知识分享

产品DFM可制造性分析

DFM 可制造性分析是注塑模具生产前关键前置工序。模具工程师依据您的 3D 图纸、塑胶材料、外观及精度要求,核查壁厚、拔模斜度、圆角、加强筋与卡扣结构,预判缩水、困气、包胶、变形等注塑问题。提前确认型腔数量与进胶位置,减少后期改模,规避量产风险。

📅 2026-08-27
专业知识分享

PDA 全自然域降解聚酯|第三代可降解材料,突破海洋降解难题

PLA、PBAT 仅可在工业堆肥条件下降解,在海洋、土壤自然环境易残留微塑料。本文介绍第三代 PDA 全自然域降解聚酯,可在堆肥、土壤、淡水、海洋环境完全矿化,无微塑料残留;加工性能优异,适配注塑、吹膜等工艺,可用于食品接触杯具、包装、农渔制品,为康濠实业环保制品提供新一代原料方案。

📅 2026-08-21
专业知识分享

激光雕刻的应用与原理激光雕刻的应用与原理

本文讲解塑胶咖啡杯等容器激光雕刻 LOGO 与图案专业工艺,解析矢量 / 光栅两种雕刻模式、核心参数调控,对比传统印刷工艺优势。激光雕刻无需油墨,标识耐磨永久不掉色,支持各类环保塑胶杯精细化品牌定制,是文创、餐饮品牌产品标识优选方案。

📅 2026-08-19
查看全部文章 →

准备好将知识转化为行动?

无论您是采购环保可持续发展餐具、开发定制塑料产品,还是探索小批量制造 — 我们的团队随时准备帮助您实现项目。

电话:0755-28960400 邮箱:KH@szkanghao.com 联系我们