为B2B买家提供行业知识、制造专业知识和市场动态。
Recently, many customers have more concerns when choosing bamboo fiber tableware. This is because on November 25, 2019, the German Federal Agency for Consumer Protection and Food Safety (BfR) released a risk assessment study on bamboo fiber tableware.
Studies have shown that bamboo fiber tableware can easily dissolve formaldehyde and melamine. In the formaldehyde dissolution test of 228 bamboo fiber tableware, the failure rate of products reached 31%; in the melamine dissolution test of 180 bamboo fiber tableware, the failure rate was 35%.
Note: The experimental conditions are 70℃, 2h. And, most of the time, bamboo fiber tableware releases more formaldehyde and melamine than traditional pure melamine tableware. In December of the same year, the National Light Industry Food Quality Supervision and Inspection Nanjing Station, in conjunction with Nanjing University of Technology released the "Safety Research of Commercial Melamine Tableware", which analyzed the dissolution of harmful substances in melamine tableware at 40℃ and 70℃. The conclusion is that the amount of harmful substances dissolved at 70°C is much higher than that at 40°C.
If you really want to use bamboo fiber tableware it, you must keep in mind the following "three notes":
1. Don't buy products with irregular labels:
See clearly whether the tableware lists the implementation standards, whether the name of the resin is clearly marked, and such tableware should be replaced regularly.
2. Do not use in high temperature and acidic environment:
Melamine, the thermosetting plastic in bamboo fiber tableware, is very unstable in high temperature and acidic environment, so these two strong stimulating environments should be avoided when using it.
3. Do not "roughly" clean:Do not use steel wool or other hard objects to scrub, so as not to scratch the surface of the tableware, resulting in increased dissolution of harmful substances.And Normally Bamboo fiber tableware always printed with "MELAMINE" on the bottom.
You can choose the bamboo fiber tableware of Shenzhen Kanghao Industrial Co., Ltd. Our tableware is made of bamboo fiber and PP.
No melamine is added, and it has been tested by FDA and LFGB, you can safely use high-temperature food and microwave heating.


探索更多行业洞察和制造知识
DFM 可制造性分析是注塑模具生产前关键前置工序。模具工程师依据您的 3D 图纸、塑胶材料、外观及精度要求,核查壁厚、拔模斜度、圆角、加强筋与卡扣结构,预判缩水、困气、包胶、变形等注塑问题。提前确认型腔数量与进胶位置,减少后期改模,规避量产风险。
PLA、PBAT 仅可在工业堆肥条件下降解,在海洋、土壤自然环境易残留微塑料。本文介绍第三代 PDA 全自然域降解聚酯,可在堆肥、土壤、淡水、海洋环境完全矿化,无微塑料残留;加工性能优异,适配注塑、吹膜等工艺,可用于食品接触杯具、包装、农渔制品,为康濠实业环保制品提供新一代原料方案。